Home / Our Products / Automatic Both-end Crimping Machine
Automatic Both-end Crimping Machine
Tiger-60
Equipment Configuration
- With the German high pixel CCD inspection system.
- Module (THK), Electric engine (YASKAWA), Pneumatic mould (SMC), Sensor (Omron), CCD Camera (Basler), Reducer (Nidec-Shimpo), PLC (Keyence), Servo drive (Mitsubishi)
- The maximum productivity can reach to 3200pcs/hr
Equipment Function
- Double camera CCD visual inspection
- CFM (Crimping Force Monitoring) sensor integrated with every crimping module
- Scrap selecting & unloading, foolproof scrap cutting unit
- Adjust the crimping height on HMI
Technical Parameters
Function | Pre-feeding, Wire feeding, Fixed-length cutting, Stripping/Half stripping, Both-end terminal crimping. |
Capacity: | Both-end crimping about 3200pcs/hr (The productivity will be slightly different according to the wire processing length) |
Drive Mode: | Mitsubishi servo drive、IPC |
Wire Size: | AWG#30-#14 |
Mould Assembly Type: | AS40、AS42、AE30(Pneumatic mould can be customized) |
Wire Cutting Length: | 35-9999mm The shortest cut length can be customized according to specific needs |
Cutting Precision: | Cutting length<100mm, Error Range ±0.5mm + (Setup cutting length*0.002) , Cutting length>100mm, Error Range ±1mm + (Setup cutting length*0.002) |
Stripping Length: | A 0-15.0mm;B 0-17.0mm |
Penetration Depth: | 3mmMAX |
Crimping Capacity: | 2TON servo motor two sets mute specifications |
Detection Device: | Air pressure declining detection, Wire presence, Wire overload, Terminal presence, Terminal overload, Stripping CCD inspection, Terminal crimping CCD inspection, Crimping force detection (CFM) |
Power Source: | Single-phase 220V/50Hz |
Power: | 3.5KW |
Compressed Air Connection: | 0.5Map |
Equipment Size: | L1510*W980*H1780mm(Extend part not contained) |
Weight: | About 600KG |
Request your quote now!
Share your information with us and we will contact you as soon as possible.
LOOK AT OTHER PRODUCTS
-
-
-
-
-
-
Automatic Seal Feeding Machine
-
-
-
-
-
-