Inicio / Nuestros Productos / Automatic Terminal Crimping Machine
Automatic Terminal Crimping Machine
Tiger-60G
Equipment Configuration
- With the German high pixel CCD inspection system.
- Module (THK), Electric engine (YASKAWA), Pneumatic mould (SMC), Sensor (Omron), CCD Camera (Basler), Reducer (Nidec-Shimpo), PLC (Keyence), Servo drive (Mitsubishi)
- The maximum productivity can reach to 3500pcs/hr
Equipment Function
- Double camera CCD visual inspection
- CFM (Crimping Force Monitoring) sensor integrated with every crimping module
- Scrap selecting & unloading, foolproof scrap cutting unit
- Adjust the crimping height on HMI
Technical Parameters
| Function | Pre-feeding, Wire feeding, Fixed-length cutting, Stripping/Half stripping, Both-end terminal crimping. Optional function: Seal insertion, Shrink tube insertion/heating, Laser Inkjet Print |
| Capacity: | Both-end crimping. The productivity will be slightly different according to the wire processing length (1M efficiency≧3500 lines,1.5M |
| Drive Mode: | Mitsubishi SERVO MOTOR,Drive,IPC |
| Wire Size: | 0.13mm²——6.0mm² |
| Mould Assembly Type: | AS40、AS42、AE30（Pneumatic mould can be customized) |
| Wire Cutting Length: | 60-9999mm |
| Cutting Precision: | Cutting length<100mm, Error Range ±0.5mm + (Setup cutting length*0.002) , Cutting length>100mm, Error Range ±1mm + (Setup cutting length*0.002) |
| Stripping Length: | Both sides(crimping ends)0-15mm |
| Penetration Depth: | 3mmMAX |
| Crimping Capacity: | 3TON servo motor two sets mute specifications |
| Detection Device: | Air pressure declining detection, Wire presence, Wire overload, Terminal presence, Terminal overload, Stripping CCD inspection, Terminal crimping CCD inspection, Crimping force detection (CFM) |
| Power Source: | 3 phase 220V/50Hz |
| Power: | 7.5KW |
| Compressed Air Connection: | 0.5Map |
| Equipment Size: | L5761*W1624*H1975mm |
| Weight: | About1000KG |
¡Solicita tu cotización ahora!
Compártenos tus datos y nos pondremos en contacto contigo lo antes posible.
